VP330-1710 / 1715 / 1717
VALUE-PRO SpeedPrimer VP330-1710 / 1715 / 1717
High-solids, high-build 2K acrylic primers with fast drying and good sag resistance, for spot and panel repairs. Mix the three shades to make grey levels VG1 to VG7.
Key facts
| Mixing (by volume) | 4 parts SpeedPrimer, 1 part MS Hardener, 0.5–1 part MS Thinner |
|---|---|
| Mixing (by weight) | 100 g primer, 15 g hardener, 13.5 g thinner |
| Hardeners | VP315-3729 MS Fast (up to 20ºC), VP315-3730 MS Standard (18–25ºC), VP315-3731 MS Slow (25–35ºC) |
| Thinners | VP830-2220 MS Fast (15–25ºC), VP830-2230 MS Standard (20–30ºC), VP830-2240 MS Slow (25–35ºC) |
| Pot life | 30–40 minutes at 20ºC |
| Spray viscosity | 32–38 seconds DIN 4 at 20ºC |
| Spray gun | HVLP or compliant, 1.6–1.9 mm fluid tip |
| Flash | Until fully matt, normally 3–5 minutes at 20ºC |
| Air dry at 20ºC | 1.5 hours with MS Fast, 2.5 hours with MS Standard, 3 hours with MS Slow hardener |
| Force dry at 60ºC | 15, 20 or 30 minutes with Fast, Standard or Slow hardener. Infrared: 5 minutes flash, then 10–20 minutes. |
| Preparation | Bare metal P120–P180, body filler P180, old finishes P240–P320. Etch prime aluminium and other bare metals. |
SpeedPrimers can go over small areas of bare steel, but adhesion wipes give the best result. They must be sanded before topcoat.
Use it with
Get VALUE-PRO from your local TIDAL partner
Mixing equipment from £76 a month direct with PPG, the full tinter range on impress and an ancillary starter pack.
Summarised from the PPG VALUE-PRO technical data sheet (PPG data sheet). For professional use only. Always follow the current technical and safety data sheets.